Funny you say that. the Ideal chap said 'BG don't know there is an adjuster on there'. He adjusted it himself as a temporary measure. Unfortunately he must have adjusted it the wrong way since the rumbling was happeneing every 10 minutes after he left. Anyway. All sorted for now.
Ideal Response 120 Combi Loud Rumbling
- Thread starter abrahamlove
- Start date
Sponsored Links
- Joined
- 25 Aug 2008
- Messages
- 5,776
- Reaction score
- 2,929
- Country
You can adjust the response gas valve but only on low burner pressure which as it is done through thermistor is near impossible as it will jump about. UNLESS that is you have a splitter which goes onto the pcb instead of the molex from the thermistors.
This has a big switch with high and low on it and allows you to adjust the low setting properly.
As Agile says unless you have the equipment done do it as it is near impossible to do.!
This has a big switch with high and low on it and allows you to adjust the low setting properly.
As Agile says unless you have the equipment done do it as it is near impossible to do.!
G
GasBod
old thread 
- Joined
- 7 Jan 2010
- Messages
- 13,069
- Reaction score
- 3,015
- Country
Manatopaman is a bit touchy.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
