Hello all. When the short OR long cycles on my DV62 dishwasher (old model - no LEDs or error codes) it get stuck and I have toi manually move on. At the end, the interior is cold. I'm really confused. I've removed and replaced the element - checked for breaks etc and checked resistance again - 28.3 ohms. Seems fine. I then ran a cycle with the mains plugged into a basic energenie monitor. Using a no-contact voltage detector I confirmed that the element has power switched to it twice in the cycle - during the wash and again when rinsing...BUT I have to move the dial on manually, AND no heater power is drawn - machine only ever draws approx. 0.6 amps - no sign of the element drawing enough power to heat up! Any ideas folks?
