- Joined
- 14 Sep 2016
- Messages
- 1
- Reaction score
- 0
- Country
Hi I'm new here!
I have a problem that has both me and Reg, my plummer a little bamboozled!
He has fitted a working (bench checked) Mclaren UK48RBB01 valve to my Gloworm spacesaver boiler. It works with a 24v feed & gas.
He also fitted new thermostat.
In situ, valve is getting a 24v feed to the terminals when the thermostat is switched on .. but it it not initiating the solenoid ... ?
This is exactly what was happening to the old valve hence fitting a replacement ... so it would appear the valve is not faulty?
Does anyone have any ideas what the problem could be?
Ant help/advice would be greatly appreciated
Graham
I have a problem that has both me and Reg, my plummer a little bamboozled!
He has fitted a working (bench checked) Mclaren UK48RBB01 valve to my Gloworm spacesaver boiler. It works with a 24v feed & gas.
He also fitted new thermostat.
In situ, valve is getting a 24v feed to the terminals when the thermostat is switched on .. but it it not initiating the solenoid ... ?
This is exactly what was happening to the old valve hence fitting a replacement ... so it would appear the valve is not faulty?
Does anyone have any ideas what the problem could be?
Ant help/advice would be greatly appreciated
Graham