Mistakenly bought duel channel hive receiver for my combi boiler!

[jaystuart]

Evening all,

The internet suggests I can still wire this up correctly to work with my combi boiler, is this true (ive gone too far to return it)?

I have a Worcester junior 28i combi boiler for ref with 3x stat outputs 'lr' 'ls' and 'ns'.

the receiver pins are 'perm neutral' 'perm live' 'hot water off (nc)' 'heating off (nc)' 'hot water on (no)' and 'heating on (no)'.

am I right in thinking I can ignore the two pins relating to hot water? im just not sure what I can do with the rest?

also for reference my current stat appears to work at 230vac.

thanks!

 

[ianmcd]

LR from boiler to 4 CH (NO) on hive
and L to L
N to N

 

[jaystuart]

thanks for the speedy response ianmcd!

so just to double check (and not blow myself up) haha:
boiler ls to channel 4 heating on (no) on hive
boiler lr to perm live on hive
boiler ns to perm neutral on hive

it appears we are switching at 230v, I take it the receiver can take this?

lastly can I ignore channel 2 (heating off) on hive?

thanks again!

Jay

 

[ianmcd]

thanks for the speedy response ianmcd!

so just to double check (and not blow myself up) haha:
boiler ls to channel 4 heating on (no) on hive
boiler lr to perm live on hive
boiler ns to perm neutral on hive

it appears we are switching at 230v, I take it the receiver can take this?

lastly can I ignore channel 2 (heating off) on hive?

thanks again!


it is LR to 4 on the hive
LS boiler to L on Hive
NS on boiler N on Hive
Do not make any links
and yes the receiver can switch 230v

 

[jaystuart]

sorry, typo, I wired it as you suggested and all is well,

thankyou!