I am going to be putting a mixer shower into my bathroom with a shower pump.
The pump will be installed prior to the mixer valve.
The cold feed will be from the mains supply with a pressure reducing valve fitted to equalise the wpressure difference between the cold and hot supplies.
The hot supply will be from the cylinder (surrey flanged) which is situated on the same floor as the bathroom and is gravity fed from the header tank in the loft.
The shower head will be approximately 860mm below the base of the header tank and about 1500mm above the base of the hot water cylinder.
Question is what sort of pump will i need? also is there anything I haven't thought of?
Cheers
Brian
The pump will be installed prior to the mixer valve.
The cold feed will be from the mains supply with a pressure reducing valve fitted to equalise the wpressure difference between the cold and hot supplies.
The hot supply will be from the cylinder (surrey flanged) which is situated on the same floor as the bathroom and is gravity fed from the header tank in the loft.
The shower head will be approximately 860mm below the base of the header tank and about 1500mm above the base of the hot water cylinder.
Question is what sort of pump will i need? also is there anything I haven't thought of?
Cheers
Brian