Hello.
I live in a small village in Hungary but I am English. My friend who is Dutch owns a farm here. Having been burgled 3 times he had a GEM-P1632 panel fitted with telephone monitoring. Unfortunately he was burgled and the monitoring company took 3 days to respond so he canceled his contract.
The problem we have is that the burglars broke the siren off the wall and smashed it. This all happened over a year ago and he has been unable to find anyone who can repair it. I am the 3rd friend to try to get it working. I have the panel ok without the siren connected. However I try, I cannot get the panel to accept his access code when I connect the siren and the siren continues to sound. We do not have an engineers code or obviously a dealer code.
Is it possible for me to connect the siren without an engineer’s code and get it functioning?
If so would you help me with the wiring of the siren? The siren cables connected to the panel are as follows
Brown +v
Blue -AUX
White N
Green zone
Yellow zone with EOL resistor
Red not used.
The siren has 2 circuits, 1 for Espirit panels and 1 for DSC and Penta panels. As the Espirit uses a 3.15A fuse and this wiring does not appear to have a fuse I am assuming this is not an Espirit panel.
On the DSC and Penta circuit the wiring is a follows
bell + to + on siren
Bell – to N
Aux – to –
Tam to zone on panel
Tam to zone on panel with EOL resistor
Any help would be really appreciated
I have uploaded the panel diagram as a jpeg, I hope it is readable. It is in my images folder,
Many thanks
Cliff
Ps anyone know where I can order 2.2K resistors in the UK. My wife is there at the moment. Tried Maplins but they want product code lol.
I live in a small village in Hungary but I am English. My friend who is Dutch owns a farm here. Having been burgled 3 times he had a GEM-P1632 panel fitted with telephone monitoring. Unfortunately he was burgled and the monitoring company took 3 days to respond so he canceled his contract.
The problem we have is that the burglars broke the siren off the wall and smashed it. This all happened over a year ago and he has been unable to find anyone who can repair it. I am the 3rd friend to try to get it working. I have the panel ok without the siren connected. However I try, I cannot get the panel to accept his access code when I connect the siren and the siren continues to sound. We do not have an engineers code or obviously a dealer code.
Is it possible for me to connect the siren without an engineer’s code and get it functioning?
If so would you help me with the wiring of the siren? The siren cables connected to the panel are as follows
Brown +v
Blue -AUX
White N
Green zone
Yellow zone with EOL resistor
Red not used.
The siren has 2 circuits, 1 for Espirit panels and 1 for DSC and Penta panels. As the Espirit uses a 3.15A fuse and this wiring does not appear to have a fuse I am assuming this is not an Espirit panel.
On the DSC and Penta circuit the wiring is a follows
bell + to + on siren
Bell – to N
Aux – to –
Tam to zone on panel
Tam to zone on panel with EOL resistor
Any help would be really appreciated
I have uploaded the panel diagram as a jpeg, I hope it is readable. It is in my images folder,
Many thanks
Cliff
Ps anyone know where I can order 2.2K resistors in the UK. My wife is there at the moment. Tried Maplins but they want product code lol.