I have an ideal classic FF250 open system.
When the timer came on today nothing happened. I hove opened the from and the power LED does not come on. From reading other posts here on my boiler I have checked the following
Fan molex on power but is 50 Ohms
Air pressure switch no power
Removed thermostat molex no difference.
checked fuse on circuit board but that is fine
Power is getting to the timer (which has been replaced, as wife wanted a new on) I have also put the old one back in with no difference.
The thermostat on my hall wall is clicking when turned.
the over temp button is pressed in
I think that is all I have checked. I know it might be a controller board but just want to see if I should check anything else first.
When the timer came on today nothing happened. I hove opened the from and the power LED does not come on. From reading other posts here on my boiler I have checked the following
Fan molex on power but is 50 Ohms
Air pressure switch no power
Removed thermostat molex no difference.
checked fuse on circuit board but that is fine
Power is getting to the timer (which has been replaced, as wife wanted a new on) I have also put the old one back in with no difference.
The thermostat on my hall wall is clicking when turned.
the over temp button is pressed in
I think that is all I have checked. I know it might be a controller board but just want to see if I should check anything else first.