Hi there,
I have a Vokera 20-80 SP Flowmatic, and I cannot seem to get the boiler to fire up, even though the pilot light is on, and I think I can hear the pump going (it sounds louder anyway). Have tried having the boiler on "Constant" and using hot taps but it just doesn't light.
I had actually just topped up the water pressure and then it stopped working . The pressure is sitting just below 1.5 and doesn't exceed 1.5, so I don't think that's really the problem, but it was working before I topped it up!
Here is a pic of the valves underneath the boiler, just in case there's anything that I have accidently closed off or such... http://www.thewhiskyworks.com/boiler.jpg
The strip on the back reads, from left to right -
Return Safety Valve (In Front of Heating Return)
Heating
Flow
Gas Inlet
How Water
Cold Water
Any help is greatly appreciated.
Many thanks!
Ralph
I have a Vokera 20-80 SP Flowmatic, and I cannot seem to get the boiler to fire up, even though the pilot light is on, and I think I can hear the pump going (it sounds louder anyway). Have tried having the boiler on "Constant" and using hot taps but it just doesn't light.
I had actually just topped up the water pressure and then it stopped working . The pressure is sitting just below 1.5 and doesn't exceed 1.5, so I don't think that's really the problem, but it was working before I topped it up!
Here is a pic of the valves underneath the boiler, just in case there's anything that I have accidently closed off or such... http://www.thewhiskyworks.com/boiler.jpg
The strip on the back reads, from left to right -
Return Safety Valve (In Front of Heating Return)
Heating
Flow
Gas Inlet
How Water
Cold Water
Any help is greatly appreciated.
Many thanks!
Ralph