My dishwasher won't wash. Flashes once and beeps. I am an electronics engineer but don't specialise in white goods so please excuse my ignorance in this department.
Having found that my fault is a type F1 (NTC) and also having located the suspect part (feeler), I have metered it in isolation. At room temp it measures about 50k which drops to about 5K when immersed into boiled water for 30 seconds.
I therefore suspect I might be being stitched up by the error indicating system as this glorified thermister (10bob part dressed up in a fancy case which they want £40 for - pllllllease! ) appears to be doing it's job.
My question is are the readings correct and if so is there another thing to look for with an appropriate solution.
Else it's back to the marrigolds for her!!!
Having found that my fault is a type F1 (NTC) and also having located the suspect part (feeler), I have metered it in isolation. At room temp it measures about 50k which drops to about 5K when immersed into boiled water for 30 seconds.
I therefore suspect I might be being stitched up by the error indicating system as this glorified thermister (10bob part dressed up in a fancy case which they want £40 for - pllllllease! ) appears to be doing it's job.
My question is are the readings correct and if so is there another thing to look for with an appropriate solution.
Else it's back to the marrigolds for her!!!