Hi, Can anybody advise please?
When I added another RKP, restarted the system, uploaded the wintex, confirmed devices from the engineer keypad. Confirmed devices, yes yes. When going to the "view RKP Status" it shows N1,R2 #NOT FITTED#. Looking at the wiring diagram in the manual and I'm now unsure. I have wired all 4 (+,-,T,R) for both RKPs to the panel Network 1. Is this correct.
The 2nd RKP behaves oddly, stops counting time, sometimes takes button requests but will not set alarm - something is obviously not right (most likely me - in the head)
When I added another RKP, restarted the system, uploaded the wintex, confirmed devices from the engineer keypad. Confirmed devices, yes yes. When going to the "view RKP Status" it shows N1,R2 #NOT FITTED#. Looking at the wiring diagram in the manual and I'm now unsure. I have wired all 4 (+,-,T,R) for both RKPs to the panel Network 1. Is this correct.
The 2nd RKP behaves oddly, stops counting time, sometimes takes button requests but will not set alarm - something is obviously not right (most likely me - in the head)