I have put a shower in a downsairs toilet. The soil pipe was cut off at floor level and a new 100mm connector fitted with a 40mm side inlet. Into this went std 100 mm T and into T went pan connector.
Trouble is that the pan connector [about 450mm long] now slopes up so the T end is about 30mm higher.
Is this a big problem or will it work OK.
Thanks.
Dunc
Trouble is that the pan connector [about 450mm long] now slopes up so the T end is about 30mm higher.
Is this a big problem or will it work OK.
Thanks.
Dunc