- Joined
- 20 Oct 2018
- Messages
- 28
- Reaction score
- 0
- Country
Hi. I have had the system running for a few months. It's hard wired to a deltabell E. Input at panel is set to tamper and the bell has the 2k2 resistor wire from 0v to T. It's been fine all this time I've checked the siren lid and Microswitch rear screw their ok.
So now I've disabled input 33 it's ok at the moment. The question is is the bell box faulty or have I got to put a link in somewhere in the panel terminals or a resistor. Do I really need input 33 set to tamper?
Thanks
So now I've disabled input 33 it's ok at the moment. The question is is the bell box faulty or have I got to put a link in somewhere in the panel terminals or a resistor. Do I really need input 33 set to tamper?
Thanks