replacing washer help!

Joined
27 Nov 2005
Messages
1
Reaction score
0
Location
Hertfordshire
Country
United Kingdom
Hi,

I need to replace the washer on my bathroom hot water tap, but all the instructions I find are for new taps. This tap is about 20 years old.

Can any one help please?

post-1-1133107610.jpg
 
Sponsored Links
those taps are called supertaps, (yeh I know), and you get the head off by undoing that big nut below the H, you will then need a special washer, (I think they have a brass seating attatched to them), but you'll need to go to a propper plumbing outlet for them.

Most people just change the taps but beware as these type of taps have a longer tail to them than most modern taps so some extension to the supply pipework may be needed if you go down that rout but if there is plenty of up and down movement on the pipes you should be ok.

Hope this helps, Regards, Trev....
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top