Hi, I know these types of questions have been asked before but i couldn't find one that matched my query exactly so i thought i would ask.
I have re-fitted my kitchen and now have come to installing my oven and hob. The kitchen used to have an oven connected to a 6mm cable with a 30amp fuse in the main fuse board.
Now i am installing a single oven Baumatic BC145 which stated that it must be fitted to a 13amp double pole fused spur. and also a hob Baumatic B72BL again which states needs to be installed into again a 13amp double fused spur.
In the kitchen as I stated I have the rather chunky 6mm cooker cable from a cooker switch (with red active light) going back to a 30amp fuse in the main fuse board.
I also have one fused spur from a double plug off a ring main.
So my struggle is knowing how to get both the gas hob (ignition) and the oven connected.
Sorry I have have missed any information.
Many thanks for any advice.
Regards
C
I have re-fitted my kitchen and now have come to installing my oven and hob. The kitchen used to have an oven connected to a 6mm cable with a 30amp fuse in the main fuse board.
Now i am installing a single oven Baumatic BC145 which stated that it must be fitted to a 13amp double pole fused spur. and also a hob Baumatic B72BL again which states needs to be installed into again a 13amp double fused spur.
In the kitchen as I stated I have the rather chunky 6mm cooker cable from a cooker switch (with red active light) going back to a 30amp fuse in the main fuse board.
I also have one fused spur from a double plug off a ring main.
So my struggle is knowing how to get both the gas hob (ignition) and the oven connected.
Sorry I have have missed any information.
Many thanks for any advice.
Regards
C