Small PVCU Window?

Joined
22 Aug 2010
Messages
386
Reaction score
7
Location
London
Country
United Kingdom
Hi Guys,

Trying to find a very small PVCU window to fit an openign of 450 wide by 600 high (including cill). Surprisingly difficult to find anyone who can help supply this? Anyone have any ideas where I could go?

Cheers Mac
 
Sponsored Links
There is a requirement to provide emergency egress windows to habitable rooms on the ground and first floor levels of up to two storey dwellings unless a protected route is provided from those rooms to the final exit.
All habitable rooms on the ground floor should either open directly into an entrance hall or other suitable exit or be provided with an escape window. This has had a great impact on which window frames can be used for escape purposes and where they can be used.
Windows which meet fire regulations are those with an unobstructed clear opening area which is at least 0.33m2, with a minimum clear opening dimension of 450mm in either height or width. The lowest part of the opening must be between 800mm and 1100mm from the floor.

With the above in mind you can have UVPC window made to any size you require
Regards oldun
 
There is a requirement to provide emergency egress windows to habitable rooms on the ground and first floor levels of up to two storey dwellings unless a protected route is provided from those rooms to the final exit.
All habitable rooms on the ground floor should either open directly into an entrance hall or other suitable exit or be provided with an escape window. This has had a great impact on which window frames can be used for escape purposes and where they can be used.
Windows which meet fire regulations are those with an unobstructed clear opening area which is at least 0.33m2, with a minimum clear opening dimension of 450mm in either height or width. The lowest part of the opening must be between 800mm and 1100mm from the floor.

With the above in mind you can have UVPC window made to any size you require
Regards oldun
This only applies if the existing windows are escape windows, the rules simply state that replacement windows should be no worse.
 
Hi Guys,

Trying to find a very small PVCU window to fit an openign of 450 wide by 600 high (including cill). Surprisingly difficult to find anyone who can help supply this? Anyone have any ideas where I could go?

Cheers Mac

Look in the yellow pages for local fabricators. I have seen PVCu windows much smaller than this.
Or the online window manufacturers might do it (but these might be the ones that limit sizes of "standard" orders).
Avoid at all costs the National places - Everest or whatever.
 
Sponsored Links
Could be wrong Fred, but to the best of our knowledge this is a window for new extension. so have covered our back side as best as we can.
Down to OP now.
Regards pldun
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top