This is the incoming supply to a power press that I've been called to a fault on this morning.
I've had time to write this post because i'm sat in the canteen until the maintenance electrician sorts it. I'll be here a while from experience.
A grand total of five armour strands are connected to the connector block, then 1.5mm tri-rated thereafter.
The line conductors are 6mm and the supply is fed from a C40 MCCB set at 1.0
I've had time to write this post because i'm sat in the canteen until the maintenance electrician sorts it. I'll be here a while from experience.
A grand total of five armour strands are connected to the connector block, then 1.5mm tri-rated thereafter.
The line conductors are 6mm and the supply is fed from a C40 MCCB set at 1.0