Hi I have a Vallient eco tect which expired its 2year warranty in June! I had a new bathroom fitted and took the radiator off the wall. When we replaced I never checked to see if it was working as it was warm!! it was chilly the other night so for 1st time put the heating on, and noticed the radiator wasn’t on but others were. I bled all the radiators, re pressured system, ( the system was off!) . Switched back on ALL ok!
Warmer weather turned heating back off! I put the heating back on last night and all the rads were on but not the rad in the bathroom. So i again checked if air was in but nothing this morning when the timer was set for the heating to come on we had nothing. Had to go to work and when i came home tonight i check the boiler and its giving the S.30 code which no heating demand from external controls but i have turned all rads to max They all have TVRs expect hall. The thermostat is a Siemens RDD10 its telling me its calling for heat as the little triangle is on i switch of reset switched boiler off reset! but nothing. I have hot water its fine. I moved the manual switch on the honey well for the heating but again nothing from it? Could it be a faulty honeywell ?
I’m not sure of a reliable heating engineer, as it was my uncle who fitted originally but now lives over seas, so cant call on him!!! any ideas would anyone recommend i take out the cover with Valliant. I had to call them twice due to a faulty pump on the new boiler and wasn’t massively impressed ......................but maybe i was unlucky??
any advice
Warmer weather turned heating back off! I put the heating back on last night and all the rads were on but not the rad in the bathroom. So i again checked if air was in but nothing this morning when the timer was set for the heating to come on we had nothing. Had to go to work and when i came home tonight i check the boiler and its giving the S.30 code which no heating demand from external controls but i have turned all rads to max They all have TVRs expect hall. The thermostat is a Siemens RDD10 its telling me its calling for heat as the little triangle is on i switch of reset switched boiler off reset! but nothing. I have hot water its fine. I moved the manual switch on the honey well for the heating but again nothing from it? Could it be a faulty honeywell ?
I’m not sure of a reliable heating engineer, as it was my uncle who fitted originally but now lives over seas, so cant call on him!!! any ideas would anyone recommend i take out the cover with Valliant. I had to call them twice due to a faulty pump on the new boiler and wasn’t massively impressed ......................but maybe i was unlucky??
any advice