We Have a warmflo combi oil installed in 2008 & have had afew problems,not major, but now have major leaks on the heat exchanger due to perished seals. There is 1 thing which I would like to do whilst it is drained down & that is some sort of safeguard to switch off the boiler when the pressure drops (as per worcester, our previous) Also a probe is hanging in midair close to the control box, should that be fixed somewhere & I have been advised to install PRV at the mains set to 2bar which will prevent any further leaks, just on with that at the moment. Are ther any other mods needed for this boiler that I may as well do whilst at this stage advice would be appreciated
Tel
Tel