- Joined
- 27 Jun 2007
- Messages
- 33
- Reaction score
- 1
- Country
Hi all.
I have to wire up a Texecom Odyssey 1 sounder at the front of the house, and an ADE Reson8 sounder to the back of the house. The panel is an Accenta G4. This work is necessary due to a house move by my friend.
I would like to ask if someone could please cast their eyes over my plans to do this? I ask because there is a microswitch connection on the Odyssey, and I do not know if I am meant to use it when connecting up *any* second sounder, or if it is only to be used when the second sounder is also a Texecom one?
If I do *not* need to use the microswitch connection, then I think I know how to wire them both up as follows:
-----------
Odyssey
C to T in panel
D to Chocbloc
A to D in panel
B to B+ in panel
S to Strobe- in panel
I would connect the tamper feed from the Texecom Odyssey to T in the Accenta panel, and connect the neg bell hold off from the Texecom Odyssey to a chocolate block back in the panel. Then I wire the RTN- from the Reson8 into the other side of the chocolate block.
------------------
If someone could please do let know if I have this right also, I would very much appreciate it.
Gary
I have to wire up a Texecom Odyssey 1 sounder at the front of the house, and an ADE Reson8 sounder to the back of the house. The panel is an Accenta G4. This work is necessary due to a house move by my friend.
I would like to ask if someone could please cast their eyes over my plans to do this? I ask because there is a microswitch connection on the Odyssey, and I do not know if I am meant to use it when connecting up *any* second sounder, or if it is only to be used when the second sounder is also a Texecom one?
If I do *not* need to use the microswitch connection, then I think I know how to wire them both up as follows:
-----------
Odyssey
C to T in panel
D to Chocbloc
A to D in panel
B to B+ in panel
S to Strobe- in panel
I would connect the tamper feed from the Texecom Odyssey to T in the Accenta panel, and connect the neg bell hold off from the Texecom Odyssey to a chocolate block back in the panel. Then I wire the RTN- from the Reson8 into the other side of the chocolate block.
------------------
If someone could please do let know if I have this right also, I would very much appreciate it.
Gary