Hi guys hope someone can help me out...
Machine is displaying error code e41, it's leaking out the bottom & the only spin that is working is the 1200rpm. Any ideas what the problem is & is it worth fixing?
It doesn't tie in with all of your symptoms but E41 usually indicates a faulty door lock, the pcb is shot, or there's a break in wiring someplace (unlikely). A door lock shorting out can easily damage the pcb. As for the leakage; you'll just have to try & locate the source. It could be anything from a leaking hose to a hole in the door bellow.
It doesn't tie in with all of your symptoms but E41 usually indicates a faulty door lock, the pcb is shot, or there's a break in wiring someplace (unlikely). A door lock shorting out can easily damage the pcb. As for the leakage; you'll just have to try & locate the source. It could be anything from a leaking hose to a hole in the door bellow.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local