- Joined
- 23 Jan 2003
- Messages
- 7
- Reaction score
- 0
- Country
Hi, am running a Turbomax boiler, installed in 2005. It develops 80,000 btu, running 5 radiators + hot water. Problem is the bath, I cannot get the boiler to run hot water to the bath. It is warm for a couple of minutes, then runs cold. Hot water is turned up to maximum, but you can see the hot water temp drop from 68 to 48 F & it wont recover. Any advice, the original installer has given up on me
Many Thanks
Many Thanks