I replaced the carbon brushes in my washer today, pretty straightforward and simple swap
I tried the machine, and it was working fine (original problem fixed) but 1 hour into the first wash it tripped the RCD!
First I suspected the spring clip holding the brush had come out and shorted, but everything was fine, the only observation was the motor was quite hot!
Any ideas?
I tried the machine, and it was working fine (original problem fixed) but 1 hour into the first wash it tripped the RCD!
First I suspected the spring clip holding the brush had come out and shorted, but everything was fine, the only observation was the motor was quite hot!
Any ideas?