How to access taps in a Whirlpool bath

[Ali Ahmed]

Hi.
I have leaking taps in this Jacuzzi bath, and can't find access to the pipes under it. The taps definitely need replacing as I've tried replacing washers and the cartridge. Can anyone suggest how to get access underneath to replace the taps.

20260831_154931.jpg

• Ali Ahmed
• Yesterday at 4:02 PM

 

[jj4091]

Can't open your link. Have you tried looking at youtube videos

 

[Ali Ahmed]

Yh not much on YT

 

[CountryFan]

Can't open your link.

Ditto

 

[dilalio]

Yh not much on YT

Nor here either

 

[foxhole]

Hi.
I have leaking taps in this Jacuzzi bath, and can't find access to the pipes under it. The taps definitely need replacing as I've tried replacing washers and the cartridge. Can anyone suggest how to get access underneath to replace the taps.

20260831_154931.jpg

• Ali Ahmed
• Yesterday at 4:02 PM

Your media is private you have not permitted access.

 

[Ali Ahmed]

Sorry guys, I've changed the settings for media album.

 

[denso13]

If it's upstairs you could maybe get in from a ceiling below, or cut a hole from a room behind. Access should have really been thought about when it was put in.

 

[Exedon]

As above if on a external wall I've cut a hole through wall in past.
9in square hole in right place then I've made inner wall good with lump of 4in kingspan foamed in .
Make good external bricks or do like on attached pic to give future access.