Recent content by 1Bit

hello firstly, I am a very skilled Computer Engineer and studied Electrical Engineering for some time after leaving school on a YTS, I have 30+ years of experience fixing VCRs (back in the day) and now PC's last 20 years. I'm volunteering for a company that has hung loads of fairy lights...

the police say they cant make him move...to make matters worse the oldest daughter (who he used to be touchy with) is now 18 and no longer under that 100m protection and lives around the corner on her own theres not reall a budget set.. i said about £150 for 4 1080p cams with 4x 100ft cable...

10 year ago I installed a 4 camera 720SD system - it was poor to say the least at £200 now my sister is having violent issues with her ex-husband whose moved a few houses down deliberately to make her life hell, and even though she has a 100m order that he's not allowed 100m near her, his new...

Hi I have 2 radiators in rooms that I dont want them to be on, the hallway and bathroom. They dont have any Thermostatic Valves and just have the regular capped bends on. Can I turn them off by removing the plastic cap and using a wrench? if so is it clock-wise to close? do I close both or is...

all working now thanks everyone :) as DILALIO said it should have had care during the summer... glad I know this now, the issue seems to be problematic units or contacts to the Rx and the pump & boiler needing a good run

sorry guys let me rephrase this - I have Danfoss RX-1 receiver with 1CH not 2 or 3 - I get hot water, tonight after I received a new Receiver and Wifi unit (same one), the new one it would not work at all??, So I put the old one back in and (as many times its been of and on the wall too) I...

Hi I have a Danfoss RX1 Thermostat which was working fine when I moved into the property, the boiler has been off since march, so today I fired it up to find its still working on hot water but no heating? my wireless unit was reporting "off", I then re-sit the batteries in the handheld which...

as im finding out the hard way hehe yeah and the angle tools is about £15 on ebay...so £45 I will see what she says, she may just pay someone too do it, how much would that cost you reckon for 3.5x3.5m dining room? thanks again for your help :)

thanks, so what your saying is I need a PROPER mitre and something to measure angles with so I can get the angle, divide by 2 and use that on each cut? a proper mitre saw that lets you dial in an angle and lock it on?

Hello well started some coving the other day to find the internal corners/angles would not meet up...flush at top (ceiling), 10mm gap at bottom (wall) - so thinking it was my cheap mitre block we bought a proper coving mitre tool from wickes for £3 - its great..but result was identical..it...