23vc's latest activity

  • 2
    23vc replied to the thread Block paving camber.
    Cheers. When you say “come off the screed rails” do you mean when you’re on a bit that you’re not screeding flat against the rails...
  • 2
    23vc posted the thread Block paving camber in Building.
    Been a few days since I’ve asked a block paving question so here goes. My driveway is generally sloped in various directions due to...
    • IMG_0687.jpeg
  • 2
    23vc replied to the thread Flat Box Profile- Such A Thing?.
    I’m guessing it exists as steel/aluminium sheeting from metal suppliers rather than anything you’d find on a cladding/building materials...
  • 2
    23vc replied to the thread render retaining wall.
    Moisture (uk climate) will kill the appearance of it fairly quickly, but silicone type although more expensive may fare slightly better...
  • 2
    Doubt you’d get away with much less than 100mm PIR if you’re doing it to building regs
  • 2
    23vc replied to the thread Changing location of SVP.
    Should be, although looks like the hopper would need to move. and include an access cap for that long horizontal run
  • 2
    23vc reacted to ^woody^'s post in the thread Screeding for block paving with Thanks Thanks.
    The requirement in this context is that rainwater goes into the private ground - via a permeable surface or soakaway or the adjacent...
  • 2
    23vc replied to the thread Screeding for block paving.
    I assumed the fact that I’m draining it to a soakaway within my garden means it’s suds complaint
  • 2
    23vc reacted to Cheslea2010's post in the thread Screeding for block paving with Thanks Thanks.
    I would check with your local authority as some will insist on a new driveway being SUDS compliant.
  • 2
    23vc replied to the thread Screeding for block paving.
    Thanks - mines draining to a soakaway I’ve dug, does that mean I’m ok with sharp sand? Any pros and cons of each? Was planning on doing...
  • 2
    23vc reacted to robinbanks's post in the thread Screeding for block paving with Thanks Thanks.
    Yea just bear in mind if using 6mm bedding aggregate that when you brush your kiln dried sand between the blocks to lock them in place...
  • 2
    23vc reacted to Cheslea2010's post in the thread Screeding for block paving with Thanks Thanks.
    You need 50mm of bedding layer which historically was Sharp Sand but now people are using 2-6mm Clean Stone for SUDS compliance
  • 2
    23vc reacted to ^woody^'s post in the thread Screeding for block paving with Thanks Thanks.
    Yes, not like your black line
  • 2
    23vc replied to the thread Screeding for block paving.
    Thanks all. I’ve got the string line out and it’s only really significant (100mm dip) in one place - the rest is within 20-30mm of the...
  • 2
    23vc reacted to ^woody^'s post in the thread Screeding for block paving with Thanks Thanks.
    Flat, with a suitable fall for drainage. Don't worry about any minor variation in the bedding sand, particularly at the un-trafficked...
Back
Top