333rocky333's latest activity
-
For quite some time, BS7671 has only required that one "takes account of" MIs (rather than the earlier reg requiring one to comply with... -
333rocky333 replied to the thread Isolating Switch.From memory yes they recommended a 3a fuse but usually stated not necessary if on a 5a or 6a circuit
-
333rocky333 replied to the thread Metal Back Box Clips.I did think that too, but i guess it will all tighten up more when the plaster boards sandwiched between the socket front and the...
-
333rocky333 replied to the thread Short bit of ceiling wire chasing.Just cut holes / slots as many as needbe behind the light, once put back you wont see them , if theres a joist simply chip out the...
-
333rocky333 replied to the thread Isolating Switch.The fan instructions likely stare have double pole isolation, not to sure what current regs say regarding following them nowadays
-
333rocky333 replied to the thread Metal Back Box Clips.£1.50 at tlc £2.50 at cef so not too bad if they work @SUNRAY I did check posts first, but not the video, I see them in cef today for...
-
333rocky333 replied to the thread Metal Back Box Clips.https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://boxstrap.co.uk/&ved=2ahUKEwj199_U_taUAxUkX0EAHQRkMYIQFnoECBAQAQ...
-
333rocky333 replied to the thread What light bulb do I need?.It's likely E27 lampholder, the insert looks way to big for a E14
-
A classic case of get the reg number first, then name your business after it. :ROFLMAO:
-
-
333rocky333 replied to the thread Indoor light with inbuilt motion sensor…...Normally a new install you would have permanent Live only, you can feed it from an existing switched live but then the sensor would...
-
333rocky333 replied to the thread Back box screw.You may find when you cut it open the original brass threaded insert is just pushed inside, they sometimes tend to just push in if...
-
333rocky333 replied to the thread Back box screw.for £2.70 you can get 100 delivered on ebay you dont need brass get BZP
-
333rocky333 replied to the thread Looking after an SLA battery.Round here most electrical wholesalers have a recycling bin and often theres a few of them batteries from alarm panels in there, as they...
-
333rocky333 replied to the thread Light fixture fitted - only 1 of 3 bulbs light up?!.Bit concerned about the transparent wires you mention you got wrong twice?, was there 1 or 2 to each lampholder, these obviously need...
