There is a UK support number on the PDF link I sent / why not give them a call and confirm compatibility.
Also search ' videx ' on ebay produces other handsets which may be a better fit.
1 - If the PIR's you are fitting have in-built resistors then you simply select the values needed according to the panel you are using. The way of doing this will be detailed in the instructions for the PIR itself and typically involves moving some jumpers.
2 - If the PIR's you are fitting don't...
I am not an alarm engineer but simply put it allows a single pair of wires to control the functions of the alarm and tamper circuit respectively. Including power - each PIR therefore only needs 4 core cable to be used. Less wiring needed in the control panel etc.
In an alarm system without...
I did see a need to fill the holes as personally I've not had any ' spider ' related issues.
The need to change to ' normally closed ' will surely depend on the PIR's and panel combination that you are using and what is set as the default / or for each input on the panel.
Just setting this up to replace an old Gardtec 800.
I have a choice of DP or DEOL for the input wiring and I'm just wondering what method is best. I have individual 6 core cable to each of the PIR / door contacts.
Any reason I should be choosing one over the other - what's the best practice I...
Gardtec 490 / End Station Dimensions H185 x W245 x D90 mm
Looks like a suitable candidate from a size perspective - let me invesitgate a little further.
Thanks for the help all.
I'm looking to replace / update an ageing domestic Gardtec 800 which is used in conjunction with 8 wired zones. Due to the location of the panel I'm constrained in fitting something which is physically bigger than the Gardtec.
Is anyone able to guide me based on these initial critera :-...