Recent content by 9600alarm

  1. 9

    update on 9600 alarm

    ill keep that in mind thanks again for all the help :)
  2. 9

    update on 9600 alarm

    hi there everyone dont worry im not here to cause trouble i just thought i would give you an update i decided to fitted the 2 of the 4 zone expander cards to my 9600 alarm pcb and wired the 5 extra zones to my panel so it now has 12 wired zones in total and it all worked in alarm no bangs or...
  3. 9

    another texecom oddysey on 9600

    thanks again for all the help and advise :)
  4. 9

    another texecom oddysey on 9600

    sorry for being a pain
  5. 9

    another texecom oddysey on 9600

    okay thanks very much, so use the power supply for the detectors and leave the speaker and bells on the panel will do thanks :) what is the need for the negative linking why is this important? forgive me for asking this but would the 9600 panel be fine with 960ma in alarm seeing as its...
  6. 9

    another texecom oddysey on 9600

    hi there as my alarm can supply over an amp and works like i mentioned, if the worst ever came to the worst i would probably put both bell boxes on a 2 amp power supply but how would i go about wiring this i can just understand how to wire 1 but i am not sure about how to wire both bellboxes on...
  7. 9

    another texecom oddysey on 9600

    hi europlex im sorry if i wasnt clear i meant the 9600 4 zone expander card that you plug into the main pcb. i was worried before about the panel load but that was before i fitted the additional odyssey and it all worked without any bangs so that made it clear to me that the panel can supply...
  8. 9

    another texecom oddysey on 9600

    hi europlex so i would mount the psu next to the panel then fit the expander card in the panel and wire the zones then take the positive and negative and connect these to the power supply :?:
  9. 9

    another texecom oddysey on 9600

    hi lectrician and everyone i just thought i would give you an update my second sounder arrived today and i added to the system and guess what it worked :) the entire system worked in alarm even the speaker and strobe and sounder front and back the front sounder was louder as it was on sab. even...
  10. 9

    another texecom oddysey on 9600

    thank you very much :) i feel a bit stupid now sorry for being a pest :lol:
  11. 9

    another texecom oddysey on 9600

    okay this is what it says on the manual the control panel output is 1250ma if the ambient temperature is 20c or 800ma if 40c. connected to my panel is 2 keypads so 90ma 4 motion detectors so 54 ma texecom oddysey 3 on sab 523ma and a internal speaker which is probably 100ma or so. i plan to...
  12. 9

    another texecom oddysey on 9600

    is that cool as long as the temperature surrounding the panel isnt 40c which it isnt so the panel can provide its full 1250ma? so if i wanted to i could add another 400ma of equipment if i wanted to before the panel overloads ps i doubt my cupboard is 40c lol
  13. 9

    16 ohm alarm speaker on 9600

    so as long as the temperature is not 40c which it isnt the panel can quite happily take over 800ma
  14. 9

    another texecom oddysey on 9600

    hi guys having understood about panel ambient temperature the panel is in a cupboard under the stairs which is pretty cool, anyway i am thinking of installing another odyssey 3 at the back of the house obvously set it to scb and the current draw from the sounder would be 58 ma as my total load...
Back
Top