Recent content by Adam Bill

Can I have them on the vent? Will that sort it out do you think?

So there meters have been used and were showing 50% humidity during the day. As soon as in bed the reading was visibly increasing and went up to 65% humidity. The door was open, I even opened the curtains. I did not have the window open due to how cold it has been. I haven't dried clothes in the...

Hahaha

Thanks for all the help. I have lived in the house for 2 months and there was no mould before this and the couple before that lived in the house over 30 years didn't appear to have this issue which to me points to lifestyle. I have checked on the loft but couldn't get in far enough of that helps...

Seems like I need to change a few habits. Do you dry all your washing outside?

I have just purchased the humidity readers and will report back. Also will have a look at options in terms of not drying clothes indoors

Also, the loft is not boarded up. Would this help??

Thanks all. So there is no furniture blocking. We have clothes on a heated airer regularly in another room but always have the windows in that room open and door closed. The bathroom doesn't have an extractor fan but again we have window open when showering and door closed. I am due to check the...

I have always had issues with mould in my houses. I have just moved and been in the property for a month, there was no mould in the house/bedrooms but now mould is starting to appear around the ceiling where it joins with the coving, generally on the window side of the room. I have a...

I would like to turn the attached images into functioning lamps with a lamp shade and am not too sure how to go about doing this and was after some advice? I can't seem to find anyone to repair these and each of these have different fittings at the top and I am not sure if they can be easily...

I have absolutely no idea what it is servicing, it is not water as have contacted the water supplier and they state it is nothing to do with them so don't really have any idea what it is servicing?

I have the following manhole cover in the middle of my front garden and it is becoming hazardous as the cover has become so brittle and loose that if someone steps on it I am worried they will fall through! With this in mind I looked to replace, due to it being in the middle of the garden I...

So I have changed the pump to constant pressure 2 and am getting a reading of 29W and on PP 2 I am getting a reading of 13W. I'm a bit out of my depth here, which mode do you think would be best based on this? On the mid position valve there is resistance but it does not return to its original...

So should I be able to just unscrew the 4 bolts and check to see if it is full of muck? Will I need to turn all the electrics etc off

Also it's quite rough wood would you still thoroughly sand down prior to Zinsser BIN?