Recent content by ADONAI

  1. A

    how are the Mice getting in the house

    hi live in a large single storey Cedar house . every winter get the Mice influx but havent got a clue how to isolate the entry point. its a large property,with brick base ranging from 6 inches to 2 foot Thanks Ad.
  2. A

    what is an OR Pole ( telecoms ?)

    HI Communal grass area near my house , some workmen have sprayed a 2 metre square with the words "OR Pole" -what does it refer to ? thanks Ad.
  3. A

    IS Toilet seat -release mechanism for removal ? pic attached

    hi cant seem to work out how to take the seat off- its an old IS Seat ( at least 5 years old) think the metal fittings may have an Allen type fitting ,but its quite rusted. any ideas appreciated. A.
  4. A

    vent axia fan- repairing broken cord ?

    hi, the cord snapped but cant find any instructions for repairing the cord ? anyone got them or must unit be replaced. attached pic of the Unit ( bit blared ), its at least 5 years old. thanks A.
  5. A

    ancient McCulloch Strimmer - Cant open head to replace cutting line

    still wont open- i see generic strimmer heads on ebay-will they fit this old model ( number 90) ? thanks
  6. A

    How to fit Lawn Edging?

    upgrade to the metal edging ,its far better and can be tapped in . it also keeps its shape well.
  7. A

    ancient McCulloch Strimmer - Cant open head to replace cutting line

    Hi Inherited an old Strimmer , but cannot open the Head to pull more line out . Any ideas ? it appears solidly stuck .unless theres a trick, Thanks Ad
  8. A

    Fuel filter levels in Ride on Mower (husqvarna)

    Hi Photo attached of the fuel filter levels during use. noticed its not 100% full of fuel. is this expected? Thanks Ad.
  9. A

    Roofing sheet- cant find this profile ? pic attached

    Hi Storm damage from friday ! its an old cement roofing sheet i think. but cant seem to get this profile online in any material. the width is approx 28 inches and the flat area in the middle approx 9 inches. Any stockists ? Thanks A.
  10. A

    Bosch classix fridge freezer-replacement light not working (2 pics)

    Fair point Harry,but Ive checked that (Its the same as my oven bulb) , hoping its the rear terminal referred to above.
  11. A

    Bosch classix fridge freezer-replacement light not working (2 pics)

    thanks jj ,its a screw type but how do you access the rear terminal,cant find any manuals online.
  12. A

    Bosch classix fridge freezer-replacement light not working (2 pics)

    Hi I have replaced the bulb and checked the light switch button at the bottom of the fridge section. all look ok,but not working. Any ideas ? Thanks Ad
  13. A

    Noise level -unvented cylinder versus hot water pump?

    hi one reason for going for a unvented cylinder is the noise level from our existing salamander hot water pump. will the unvented cylinder be much quieter ? Thanks Ad.
  14. A

    Time / Cost of unvented cylinder fitting ?

    Hi Is there a "typical " time needed for an installation of a unvented system ? we have an existing gas boiler and cold water tank in place in a large bungalow. starting to ask for quotes but honestly havent a clue what a typical installation would take. Thanks Ad.
  15. A

    Identify this Mira (?) Mixer

    Hi Can anyone identify the name and brand of this mixer. its at least 5 years old . its randomly leaking from the head ( 2 cups in 24 hours) and Im trying to get a manual for it. Much appreciated Ad.
See more
Back
Top