Recent content by AGW1

Help, I replaced a radiator including TRV so I had to drain to fit, when I replaced I have no water in the first floor rads but the groundfloor are full, when the heating is switched on I now have no hot water or heating do I have an air lock, if so what do I do Thanks Allan

Cgeers Tony Nice of you to post Regards Allan

Thanks Hugh How can I tell if it is an unvented sustem Cheers

Sorry me again Matt Managed to clear the problem with the diverter valve (slight tap with a hammer frred it, it is working fine now the hot water is getting to the cylinder (red hot) but no further still no hot water, I thought maybee the coil has had it in the cylinder what do you think...

Hi Matt Just had a look there is a small what looks like overflow tank near the main cistern I have had a look at the cylinder looks like a pipe going into the loft to this small tank from the cylinder cant see any pressure release valves or similar on the cylinder Allan

Thanks Matt will try that. Cheers

Thanks Hugh will try tomorrow bit late now Cheers Allan

HI Chaps, I recently changed a radiatior refilled the cylinder etc fired up the boiler and the rads are all working fine but I have no hot water, the cistern filled OK this is an old system and it has two two way diverter valves. When I switch the time clock to hot water only the first...