Hi Sparkymarka
No - no zone lights are lit whilst the tone is beeping continuously after the entry code has been keyed in and the beeping only stops when I key in the code again.
Hope that helps
Thanks again
Alan
Hi Sparkymarka
Opened front door - put in code - "day" green light goes out and exit tone bleeps continuously - "power" light stays lit red - Is that what should happen to the lights?
Also the battery in the main control box has not been changed in the last 5 years - could that be the...
Dear Sparkymarka
You are brilliant - the sensor cover ( which tied up with the tamper zone number ) was loose and now that I've secured it and pressed reset the zone number is no longer showing on the control panel.
However whilst the control panel power button is Red and the Day light...
Thanks sparkymarka
The sensor in question seems to be functioning ok ( it flashes red when it senses someone) and the system has now decided not to accept the entry code - in other words I key in the code but there is no exit tone.
Can you suggest how I can :
a) reset the tamper and...
My Optima 2 plus alarm system is stuck showing a Tamper zone number and will not clear when the system code is entered and the "reset button" is pressed.
Does this mean one or more of the batteries is dead and if so how can I establish which which one.
Lastly is this a DIY job and can...