Recent content by aldo123

I have a new (ca 9 month old) house from a reputable builder. The house is white rough cast/pebble dash or whatever it is called - scratch coat went on, white cement type base layer and then little white stones were thrown at the render to create the finish. I've recently started to get...

For info here is the hose in question: http://www.espares.co.uk/product/es1567968/tumble-dryer-pump-hose?PartTypeId=1585&ManufacturerId=927

Hi, just double checked and it is pumped for sure as the manual says the connection to the drain must be no more than 80cm from the floor level. I still haven't found any way of connecting such a narrow pipe to the standard spigot they provide for washing machines etc... Any help appreciated.

Thanks for taking the time to respond. It must be pumped as the instructions tell me to disconnect the current pipe that is at the bottom of the machine and connect the new one. The old pipe runs up the back of the machine into the water vessel at the top.

Hi, I just bought a new condensing drier that comes with a drain hose. So I bought a twin spigot connector and installed it under the sink. Issue is that the washing machine drain fits fine on the end but the tumble drier connection hose is only about 10mm across so doesn't fir the connection...