Sofa....Sogood...System still bubbling and gurgling away at startup.
After draining down the bottom rad I bled out a couple of the others also,but no huge volumes of air were apparent.
Then I decided (foolishly ?) to bleed the circulating pump.
With the pump off I undid the central spindle...
Ok people,Just down from attic.
With the somewhat reluctant assistance of Mrs S I set up a draining operation from the most extreme Rad in the system.
I drained down nearly 75mm of water from the F&E`s previous level.
At this new level the ball valve is just beginning to open and as it`s...
Sound man Marty,Visitors have interrupted investigations but on further checking the F&E tank I find it full almost to the overflow.
Water temp is cold and the sides of the tank itself are coated with a fairly thick greenish coloured "Gloop" which however is not floating about in the water...
Just down from the attic.
Smal tank full and ball valve working...however....The I found shepherds crook vent pipe which sits over the tank was sitting very low and actually touching the surface of the water ....Would this cause some form of problem ???
Hello all,first post here on what looks an excellent site.
Boiler is a Glow Worm Spacesaver RF wall hung in downstairs kitchen.
House is bog std 3 bed semi.
System has performed faultlessly for years but in past couple of months (Oct 2007) has had a worsening symptom.
On first startup...