Hi all.
Just an update.
I have a dual zone s plan setup.
Installed nest over the weekend and seems to be working fine. Replaced the controller at the boiler and thermostat in the hallway.
Connected to 3 (heating) 6 (hot water) and linked live to 2 and 5. Thermostat in to t1 and t2.
Will...
I guess that clears it then. Will connect to 6 and 3. And link live in to 2 and 5.
I think the second thermostat is wirelessly connected to the original controller so don't know (battery power) so don't know whether it is a true 2 zone? Not sure how to check.
Hi. Thanks for your reply.
Yes the house has additional zone and thought as much that I would need a second nest.
Ot1 and ot2 - I don't know whether just putting wires in to ot1 and ot2 from the 2 existing wires (heating / water - connection 3 and 4 from danfoss ) will just work. I assume...
I don't believe there is an outside temp sensor. Not one which I was made aware about. Is there anything I can check or take photos off that could clarify?
Otherwise, is the wiring suggested above sound correct?
ok guys....so have done more reading...
Looks like i connect as below....
L - Live - All Live wires
N - Neutral - All Neutral wires
1- Satisfied (Heating) - Nothing
2- Common (Heating) - Loop Live to here
3 - Call for Heat (Heating) - Wire from old connection 4
4 - Satisfied (Hot Water) -...
Hi All,
First of all, thanks to all who can assist in my project of replacing current controller/thermostat with Nest.
To set the scene
- New build house which has an Ideal Logic Heat H24 Boiler (OpenTherm compliant)
- Danfoss FP715 controller at the boiler
- Wired Thermostat in the hall way
-...