Laid my floor a few months ago, just wanted to post my experiences in case useful to somebody else. I eventually went for QuietWalk LV 1.4mm underlay under Korlok, and I'm very happy with the results. I'm grateful for the wise advice I got on here!
It feels like the acoustic insulation is very...
Thanks for the tips Andy, they were useful! There's no much info out there about levelling selected parts of a floor. Just adding some bits about my experience as a total amateur with Ezy Pzy Levelling Compound from Homebase, also a latex compound you mix with water.
A 10kg batch doesn't go far...
Hello, I'm planning to lay Karndean Korlok in my flat. I've removed my old engineered wood floor. Underneath that I have a 6mm black rubber Tredaire underlay for acoustic insulation. Do I have to remove it before laying the Karndean? Their instructions say their flooring needs no underlay, but...
Just thought I'd post an update on here for anybody else who has similar problems. The heater I moved from the bottom socket to the top worked for a few weeks, but eventually also packed up. I got 2 new heaters off eBay, and was lucky enough to find an excellent Bulgarian plumber who drained...
Pic looks the same as the one I'm using at the moment, and the part number's right. I read somewhere the type with the key was introduced later - earlier versions just had a different diameter. If I order one I'll post the results on here.
Not sure about the first one, it does say "Heatrae sadia Megaflo/Megaflow Immersion Heater & Stat" and "OEM REPLACEMENT FITTED WITH TSE THERMOSTAT", so it looks like it is both.
In case anybody needs the part numbers, I got these from Heatrae. (This is for a DD 210, "old style" heater with a...
Update in case useful to any fellow DIY ignoramuses..
matt1e was right - the stat on my top element was broken. When the water heats up but doesn't stop heating up till the safety thermal cutout on the stat pops, that's a good clue where the fault lies.
If your bottom element works OK, an...