Recent content by andy260

  1. A

    Mira 723 - won't turn on

    Nothing, disconnected hose as well but nothinghappens.
  2. A

    Mira 723 - won't turn on

    All the dials turn smoothly, when all back together. I re-greased the piston and spindle - does it need water pressure to push it out or anything? Made sure that it goes through the holes - is there some sort of calibration required? Maybe I could take the seals off and check water does...
  3. A

    Mira 723 - won't turn on

    I took out all parts from 801.20 (body assembly) outwards. Water comes out from both hot and cold supply inlets when there is no cartridge assembly in. There only seems to be one way of fixing it all back together as the 'knotch' at the bottom lines everything up. Thanks for your time...
  4. A

    Mira 723 - won't turn on

    yes - spent a day working it all out!! had that diagram to work to and the one within the service pack.
  5. A

    Mira 723 - won't turn on

    Morning, Shower (Mira 723) wouldn't turn off or change temperature so got the service pack and dismantled it. Replaced all seals and washers and fitted back together. This is within a ground floor flat so water tank is at same level as shower. Water goes into the chamber but doesn't come...
See more
Back
Top