Hi, I plan to tile my shower next weekend and I am a little confused by which adhesive to use - I have a large format tile 300x600mm and the adhesive needs to be waterproof, I was looking at the dunlop range but dont know which one to get or indeed where to buy it from?
The tiles are...
Hi Guys, I have just ripped out my lovely 1200mm shower tray due to leaking mosaic bricks, Im left with a thermalite shell, can you aquapanel directly onto the thermalite like traditional plasterboard?
Thanks
Any questions please let me know
Andy
I currently have loads of crazy paving which i intend to dig out and lay a mixture of slabs and decorative chippings. The slabs are 450mm squared riven.
I was planning to level of the soil and then lay the slabs on a wet mortar bed, i as just wandering how wet this bed should be and what...
Tony, what do you actually get from corgi, some kind of certificate now or just a standard letter and do i have to have this to show the building inspector as the boiler is in a new extension
Thanks
Hi, ive misplaced the benhmark certificate but he did fill it in and the inhibitor was called fernox or enox, just cant remember at the moment.
He also gave me a receipt with the corgi number on it and said he would notify them.
Cheers
thanks guys, he has done a good job. The reason is was questioning the price is that most of the plumbing was already done for him including the gas pipe (this was all brand new) as i said he just came, connected 2 rads and the boiler including the flue and the condensate and pressure safety...
Just had the final bill from the boiler installer £400 to install a ferolli f30b. Basically all the plumbing was within 1 metre of the boiler including gas pipes and eletric supply. He had to put the flue straight out, drill straight behind for the condense and safety overflow, and hang and...
Hi, when i did the heating, the ceiling was down so i chased the pipes down the wall and then plastered over, all the pipes drop from above and come out behind the rad.
Cheers
Andy
Hi, thanks for the reply, the feroli man checked the flow valve, and said its ok - do you think its an installation or ferroli issue, this is driving me nuts.
The ferroli engineer did suggest a non return valve on the cold inlet also, but i just think that there are some other issues as...
Hi, i have a 6 month old ferroli f30b. The problem is that its basically pot luck to get hot water from the boiler: the symptoms are as follows which again dont happen all the time and neither do they occur together:
1) the boiler will look as if its going to fire up for hot water even though...
Guys my f30b is about 6 months old but its pot luck if you get hot water from it, sometimes you do, sometimes you dont. It doesnt matter if the heatings on or off but i have noticed that sometimes the hot water comes through but it doesnt swith the heating off (the tap light doesnt come on)...
Why not use timber around the sink only and then laminate on the rest of the kitchen, or fit it in a kind of stand alone style.
But the others were right dont waste your time on this.
Andy
use normal screws behind the hinge plates and behind the edge of the shelves, that way you dont see any screws, looks neater than those connectors but only iff you havent got hundreds of holes in the cabinet in the first place.
Andy