Hi
I am in need of someone who can turn 4/5 replacement stair spindles. They are approx 600mm long and made from 41mm blanks. Material not important as they will be painted.
I am in Leeds (LS7) so was wondering if anyone knew of a company/person that could do this. Or alternatively...
Hi
I am currently fitting a grohe frame for a wall hung pan and just had a couple of questions that I hope someone can help with
1. Aquapanel or Ply for boarding out in preparation for tiles
2. method of fixing boards to the frame, or should I make a timber frame and attach to this...
Hi
I'm no professional but I wouldn't fill a 20mm gap with just sealant. If you're not used to working with the stuff then you may be left with a very sticky and uneven mess!
Some sort of beading may be the answer. If I were doing it to my own house I would glue in timber strips slightly...
I would wait till the painting/varnishing is done as most sealants aren't overpaintable.
You could seal the bulk of the larger gaps before painting, aiming to leave it flush or slightly below the face of the frame. Make sure you don't get any smudges on the frame as the finish won't stick...
Hi
I am currently fitting a grohe frame for a wall hung pan and just had a couple of questions that I hope someone can help with
1. Aquapanel or Ply for boarding out in preparation for tiles
2. method of fixing boards to the frame, or should I make a timber frame and attach to this...
Hi
You should remove before the paint dries or you'll not get a clean edge. With that many windows you should give freehand a go, you'll be great at it by the end!
Taping before each coat can be very time consuming. Just remember that you can scrape the glass if need be.
Andy
Hi
Does anyone know if B&Q will have the 3 for 2 paint offer on anytime soon. Looking for a bit of insider knowledge!
I need to buy a load of paint in the very near future and I know that as soon as I get it then the offer will be on the next week, which will annoy me no end!
Cheers...
Hi
I am building some cupboards on the bedroom, using ikea integral hinges.
Just wondered if someone could tell me the distance to mount the hinges from the door edge. Using 18 mm MDF.
Thanks
Andy