Recent content by Anthonyl

  1. A

    Indesit W123

    put it on the dot at the end of the each section and it should cancel the cycle with a few flashes of the led on facia, if that does not work it sounds like pcb. hope it helps Ant ____________________________ Lynda, moderator Please note forum rule 7
  2. A

    HOTPOINT WMA37 Smoking Drum

    most likely to be something to do with motor brushes or the belt
  3. A

    Neff Double oven

    if its nearly brand new just ring storewhere you bought it from and get them to get an enginneer out! just to make sure good luck Ant ____________________________ Lynda, moderator Please note forum rule 7
  4. A

    Hollywell smartfit kit (peterborough area)

    ____________________________ Lynda, moderator Please note forum rule 7
  5. A

    Neff Double oven

    check one of the elements has not blown if not that wat size of cable is it on? Ant ____________________________ Lynda, moderator Please note forum rule 7
  6. A

    How do you 'split' a zanussi

    take lids off you will have half dozen bolts in middle of cabinet take the 2 out of the back half of the cabinet then there is 1 each side in middle near the bottom with caps on it. then there is 2 or 3 bolt in back in both bottom corners and sometimes one the other side of drain hose,you also...
  7. A

    Neff Double oven

    has it a fan setting ?
  8. A

    Hotpoint WD640 not drying Photos>help identify bits

    to check fan just put on dryer on control and turn on and see if fan is turning if not its proberly blown stats, i have not known the element to blow very often! good luck Ant
  9. A

    Hollywell smartfit kit (peterborough area)

    ANybody in peterborough that can come around and have alook and quote to sort problem! thanks
  10. A

    Hotpoint WD640 not drying Photos>help identify bits

    check the fans working and also checking for broken wires around heater and stats on top! Ant
  11. A

    Hollywell smartfit kit (peterborough area)

    hi i have been told i need a hollywell smartfit kit fitting to my boiler and i was given a quote of £500 with the kit i have seen i can get it for £60 + vat but i need somebody to fit it! is there anybody in peterborough area that can fit one please contact me with a price thanks Ant
  12. A

    Potterton PTT2 boiler Stat

    the light is showing it has not got up to temp!
  13. A

    Potterton PTT2 boiler Stat

    hi can someone please help! i have fitted a new ptt2 stat for the old one which was a ppt1 i hav fitted it and it still wont turn the pilot light on the boiler down stairs and on the stat it says it under temp so it shud kick in but it dont ! does anybody know why or something i can check...
See more
Back
Top