Recent content by anton07

Hi all.Having problems with an ariston eurocombi.when there is demand for heating or hot water,the pump runs and the fan runs,not at full speed however.The temperature LEDs on the front of the boiler which indicate how warm the water is going through the system are all lit up and the other LEDs...

Update- DHW high limit cut out and the A.P.S have been changed and there is now continuity across them(there wasn't before).However,the boiler is stil doing the exact same thing.There is virtually no voltage at all across the gas valve so my thoughts are now turned to the gas valve or PCB being...

Im just finding it strange how there can be continuity across the low water pressure switch and none across the A.P.S or high limit stat as they are wired in series.The guy from glow worm now reckons both the A.P.S and the high limit stat could be faulty.I didnt think there would be continuity...

The fan does go up to full speed.I phoned up Glowworm and the guy said to check the continuity across the A.P.S first,then the low water pressure switch then the high limit stat as the three run in series.However there is no continuity across the A.P.S,continuity across the low water pressure...

I tried manually checking the A.P.S today though and it didn't work this time,it still clicked but the burner didnt light.I know the A.P.S can stil be nackered even if its still clicking but Im still wondering if its maybe the board.The voltage across the connectors to the A.P.S is only coming...

hi all. the boiler is a glowworm swiftflow 100,around 12 years old and regularly serviced. when on demand for either heating or hot water the pump and fan will run.You can hear the click at the air pressure swich but thats about as far as it goes,the main burner wont light.A few weeks ago...

Hi all, Ive got a problem with my Vokera 12 48 R.S.E mynute.The boiler will not fire at all for heating or hot water.When its calling for heat,all you here is the initial startup (pump running and sounds like fan running at a low speed)and a click at the board then nothing,no pressure switch...

pp

I was on this website asking the same question a few weeks ago.I just managed to get a new heating system in from a company called Plumbing U.K which I found on glasgow-gumtree.com. I got a few people round to price it,British Gas included and that mob seem to have done a good job of it.I hasd...

Thanks a lot guys,that helps me out a bit!!

Hi all, I was thinking about going on a training course for PAT testing as the letting agents I do work for is starting to do the annual checks.I am a gas engineer to trade and I want to know if Id be able to just do the one course and exam to be able to legally carry out the work or if there...

I am having a problem with a vokera option 24.A week ago, the boiler ceased to work completly.when calling for heat the pump would run but the fan would not operate.Strangely,there was only 190V going to the fan so I replaced the board.Now the boiler fires for about 10 seconds and then cuts...

I own a Redring Dualheat unvented boiler.The heating and hot water are heated by electrical elements.A few weeks back the boiler stopped working completly,no heating or hot water.I changed 2 of the 20amp fuses on the PCB and it worked again until yesterday.On inspection I found that 1 of the...