Recent content by Arturs Kirsis

Just wanted to let you all know that your advise helped a lot!!! Thank you! All installed, and been working for a week now. Again, thank you all for your help

Thanks a lot stem! I think that is what I was missing! I was treating my unit as a 1 channel unit when it's actually a 2 channel unit. I will try to connect it all again tomorrow and put the switched live in terminal 4 which I didn't try today and see if that works. Thanks again for all your...

That's just the thing I need the 1 channel installation (CH only) but I bought the HW/CH unit. Could that be causing an issue?

Thanks Stem. I knew I would miss something and thank you for pointing it out. Hopefully below info will help :) I do have a combi boiler indeed and it was wired to 230V control. Also, quick update on what additionally I have tried since last update. I found the switched live wire from boiler...

I think I got it. Black wire is the switched live which I was missing. So basically what I need is Black wire in terminal 3 of new wallplate. Link L to terminal 1 Ditch the grey and brown wires from terminals 1 and 4 of the old wallplate as they aren't required. Confirmation of my trail of...

Digging deeper I just found a black wire in the back which is looped with the other black wire. Wondering if that's the one that I need to use somehow? Sorry if I'm not explaining things properly and it's hard to understand. English isn't my first language :(

I'm wondering if I've purchased the wrong Drayton Wiser Hub. I bought hot water and heating one however I only needed the Heating function. This shouldn't really be a problem if I use One Channel setup/wiring tho right?

Hi All. I very much hope that somebody could help me here. I've purchased Drayton Smart heating kit and today attempted to replace my current Honeywell hub with Drayton Heat Hub but unfortunately got stuck with wiring. This is my current wiring for Honeywell hub.(There is a spare black wire...