Some require some advice please
One of the conditions for a renovation project have asked for a energy assessment which shows 10% emissions reduction.
Please see attached condition.
The Energy assement as come back recomending solar paneling (30 Panels) to acheive this reduction. Also been...
I have a friend who has horse stables within the defined green belt.
Now this horse stable is situated end of a row of terraced houses. The stable is L shaped and is 11.3m by 9.2m.
Please see attached site plan. The plans are to demolish the stables and construct a 2 storey house on the...
Require some advice please.
House is all gutted and understairs i want to make a hub centre point for cctv dvr alarm panel and broadband router.
I am doing the first fix throwing all the cables in.
My question is i want to move the braoadband router from to outer wall to understairs hub what...
Plans have been approved to extend 4.5 meters from original 3 meter extension total 7.5 meters. on the plans it shows original walls for the old extension and extending to new cavity walls.
I have a query regarding rear extension planning permission
there is a existing rear extension about 3 meters. Planning submitted to extend further 4.5 meters from the original extension (Original extension classed as part of the house pre 1948) so total 7.5 meters. plans approved
in cases like this when the job has gone on too long and the electrical regs have changed during the build ie Amendment 3 2015. BC would accept a condition report.
i had a similar scenario where the extension build started 2012 the electrician did 70% of the work including fitting a 17th edition...
My friend has had his application rejected to convert single dwelling into 2 flats.
everything was going smoothly no objections, no issues, positive feedback until last minute the planning officer pulls out a paragraph from local core strategy guidance that this property is not within 250...
I have a outdoor lighting sensor max switching load of 2000w
I wired up 5 wall lights (10 led bulbs at 7w each) Max load 70w via a outdoor 2 way 20a switch to a lighting sensor
Details of wiring= 2way switch live in COM and all neutrals in a connector block...