Recent content by Aysha05

Thank you so much for the support! I was at my wits end!

Yay! Success! :lol: Plumber has solved the problem...the ball valve? was not working properly....he's just replaced it...hopefully we'll be able to use the shower without it cutting off mid shower!

Have an engineer from the shower manufacturer coming tomorrow. Hopefully he will check that. Have plumber here at the moment trying to get the hot water supply going again. Been without hot water all weekend.

That makes sense. What do I do now? All i want is a shower that works without cutting out the hot water supply. Also, how come I didn't have this problem with my last power shower?

There's plenty of hot water...it just stops when we use the shower...yesterday the plumber unlocked the air and the hot water came through.....it only happens when we use the shower.

Also with the old one the shower worked even without it being switched on, albeit with low pressure. But with this one the water only flows when it's switched on - then theres an eco button for boosting the pressure.

I've had a power shower before this with no problems at all. All this happened since I had the new one installed.

The second one probably 10 min after the first.

There is one pipe coming out from the top of the tank and one from the side.

Sorry! don't understand what you're asking.

Not very technical but the cold is in the loft and hot water tank in the airing cupboard.

HELP! :cry: I've recently had a Showerforce 1500XT Power shower installed. Firstly it leaked from the bottom of the box before we even used it. An engineer came out and replaced the mixer valve which stopped the leak. Now after 2 showers it cuts out completely and cuts off the hot water...