Recent content by azhar44

Much appreciated Stem

The existing room thermostat can be left in place and set to maximum to prevent it interfering with the Tado, or you can remove it and insert a link to join the terminals on the control PCB where the two live switching wires have been removed from. Do i still need to insert a link as you have...

Thank you very much for helping out, i have a good understanding of what i need to do to get the Tado working now The whole system is Elite Cyl Pre-Plumbed Twin Zone 170 L indirect (esppt0170) im only using 1 zone and its a 2 port valve on it

the 3 channel programmer is a TQX0027, there seems to be only 4 wires coming out off it and wired into the PCB, It think its basically the same unit as the Esi one i don't have a frost thermostat fitted I am only using heating zone 1 My only question would be, where is the fifth wire from the 3...

Advice needed to replace existing 3 Channel WIRED Programmer and Wired Thermostat with a wireless Tado V3+ I need to remove the 3 wires on the Heating Zone 1 connector and also remove the 4 wires on the 3 channel programmer Its a Y plan system Just need help connecting the 4 core cable...