Recent content by banjoking

Can you elaborate please. Nothing wrong surely, in upgrading the cable, or fitting the RCD/MCB. Are you suggesting (a genuine question!) that the issue is with the association of a modern RCD/MCB with an old style CU. My understanding of the Part P regs, is that there is nothing which precludes...

Hi Guys, I am in the process of replacing the shower in my daughter's house with a 9.5 Kw model.The current feed is 6mm T+E and I am upgrading this to 10mm (about 7m run). At the same time, I want to replace the existing single-way fused unit serving the shower with an RCD/MCB unit. The fused...

Thanks Bahco! Yes will try this.

I am in the process of replacing a radiator and moving its location slightly. I intend to fit new valves amd extend/modify the pipework (8mm)using end feed connectors. I have a rubber bung kit and propose using this to avoid draining the system, but will the residual water in the pipework cause...

Great! Many thanks for your advice Dave!

Thanks for reply Dave. I think I may have initiated a wild goose chase! The boiler was on timed control, and appeared to close down at 0930, half an hour before the planned shut off at 1000. I think now it may just have been that no heat was being called for! Anyway, seems to be working fine...

Hi Guys, New to this, so bear with me please (and tell me if I am inadvertently breaking any forum rules!) Baxi Solo 350 PF. Recently had Gas Valve replaced and working fine until this morning. Pilot light has gone out and boiler has now shut down (no panel lights at all) Can I relight it...