Recent content by BathClick

Hi, I would definitely recommend a thermostaic mixer shower with your system even the best and most powerful electric showers don't touch a mixer in terms of flow rate. Please bear in mind that with a combi boiler the flow rate at your shower is determined by the the cold water pressure...

Hi, I'm afraid it looks to me like a dig the floor up job, There are flexi pan connectors available made by McAlpine but it looks to me like the front corner of the toilet pan is going to be on top of the soil pipe. You'd need to break the concrete up deep enough to get an elbow on...

Hi, I'm not familiar with the two systems linked in the other posts I can tell you though that the geberit frame and cistern require a minimum depth of about 135mm give or take a couple of mil. We use nothing but the geberit system for this kind of job and they're bullet proof, if you do...

Hi, I'm sorry to hear that you've still got the same problem. For my money it still sounds like a problem with pump, after your last post describing where the pump was connected to and without the loop I thought changing that would cure the problem. You can make a shower work on any...

Hi, I've had a look at the pump specs and wikes say it will operate on a minimum natural flow rate of 0.5 L/m I find hard to belive that flow rate could be causing the issue. Please take a look at this pdf http://www.stuart-turner.co.uk/media/4336-Showermate-Standard-Single-and-Twin.pdf...

Hi Could you post the make and model number of your pump? if I know this I can check on the minimum flow rate required. It would also be worth running your shower into a bucket (without the pump running) for 1 minute and then measuring the water to find out what the natural flow rate...

Hi again, That doesn't sound right to me, so here goes I am assuming that you've got a cold water tank in your loft and a hot water cylinder, the hot water pressure coming from the cylinder is determined by the difference in height between the hot water cylinder and the cold water...