It's as well to be worried about spoiling the surface. I know from experience that fragranite won't stand up to the briefest of encounters with strong paint strippers of the Nitromors variety. Turps doesn't seem to bother it but brush cleaners could be tricky. Fragranite probably has an acrylic...
Thanks, the B208 must be the one which caused customers so many problems. It looked mint when I binned it but the dual flush button seemed of doubtful design. Hopefully, the manufacturers of modern flush mechanisms are getting their act together. Old fashioned toilets never seemed to need any...
I'm not sure about that being such a good idea. I reckon that's where the plumber who installed my bathroom got the toilet. The seat was something the Pound Shop would be reluctant to stock and the flush valve was rubbish. If you need a new seat and cistern fittings, which you might need a...
I had the predecessor of the Macdee Arcadia which had around a 90% success rate in flushing. It was not a good design, tending to stick so water continued to dribble into the pan. When I eventually identified the manufacturer as Macdee, which wasn't easy, I was able to swap it over in minutes...
I recognise this valve as it has been giving the same annoying problem since the toilet was installed. Nothing fixed it and I discovered that the valve and button are of poor design. Lots were replaced free under the 1 year guarantee. Too late for that now though. It's got no identification on...