Recent content by Berko

I thought someone was going to say that :/ Now, the server also says it's rated at 400W. But that is a ridiculous figure as not a single component inside uses more that 12v at 0.5amp, what's that all about? That means to keep it on 24/7 it would cost about 40 pound a month :O

Hey guys, I bought a large rack mount server of eBay about 10 months ago and my intention was to put it in the loft as it would be out of the way, and the noise would not be bothersome. I put some sockets up there but never added them to the upstairs ring main. However, more recently I have...

Have you checked the wires from the stat to the matts? They could be shorting. Could disconnect the matts and do some tests.

Okay so my spelling is not good >< Also I prefer to be called a he ;) I was told it was 10mm t&e which is more than capable of taking 40amp. But I need to confirm this.

I was not going to change anything until I see whats going on... And how could it cause a fire? Some showers do need a 40amp MCB

That is what she said actually, usually just after showering. I was planning on doing a visual check on all the connections and replacing the MCB with a 40. But is that an unnecessary cost? Also is that notifiable?

It's defiantly an MCB. Nothing else trips in the CU either. Kinda silly posting without all the info but I thought this might be a common problem.

I'm sure this has been asked before, but bare with me. A family member had a full re-wire done just less than a year ago, and at the time she did not have a shower. The sparks put in a feed to the shower and left it at the DP iso in the boiler cubord. A few months after this a plumber put in...