Steve says it is an Impulse Rapide Flush Valve with 50mm Round Button. No longer manufactured but there is a replacement that will fit in the cistern and fits the lid hole. So I have ordered one.
Ok, neither of my two local plumbers merchants can help me identify a replacement button for this mechanism. There are no printed names on the button or mechanism. The button has lost one-half of its cover and the spring is very weak and gets stuck so it needs replacing. Tried a few bathroom...
Are there any concrete garage erectors on this forum? I am looking for any practical does and donts of taking down and relocating a concrete sectional garage.
It us 20 x 8'6" pebbledash sections each 2' wide. Wooden roof trusses, corrugrated roof. I have read all the asbestos/cement fibre...
Thanks for further information.
The OSB3 is here now so I will board inside and out. I have checked the cost of breather membrane. Not going to add much to cost of project. i want this shed to last so I will go with batterns and airgap, so does that imply just vertical batterns with a...
Thanks for the answer about an air gap.
I was just going to board it with OSB on the inside too for neatness, with some good quality shed paint. I am impressed by how well Johnstone's Trade Workworks renovated a dilapidated summer house and has hardly weathered over the last 2 years. Not...
I am building a substantial shed, 16x8, have built the frames from 3x2 on 16" inch centres or thereabouts to match the 6x4 OSB3 sheets. I am thinking of the cladding now but read a couple of posts where the builders proposed batterning the OSB before attaching the shiplap. I was going to attach...